Follow

TV CHANNEL IS DISPLAYED INSTEAD OF VIGGO INTERFACE

Viggo input is usually HDMI1, but can be a different HDMI port as well.

If the antenna is connected to the TV, follow the instructions below:

A. Press SmartTV on the remote, and confirm that the TV switches to the Viggo input source and that Viggo interface is displayed.

B. Press the TV button, and confirm that the TV switches to show TV channels.

C. Turn TV off.

D. Turn TV on.

If TV turns on to show TV channels instead of the HDMI input, refer to the TV manual to change the power on default source to the relevant HDMI port.

If the antenna is connected to the Viggo box, follow the instructions below:

A. Press SmartTV on the remote and confirm that Viggo interface is displayed.

B. Press the TV button and confirm that the Viggo box is playing TV channels.

C. Turn TV off.

D. Turn TV on.

If TV turns on to show TV channels, then the power on default source is set correctly. TV channels are displayed because the DVB player was activated.

Press the SmartTV or Home buttons to return to the Viggo interface.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk